Piping Solution
Products
ARABIAN RIDGE offers a comprehensive range of solutions for the industrial, oil & gas, and construction sectors, providing high-quality products across multiple categories:
| SEAMLESS, WELDED PIPES /TUBES | |
| SIZE: | SMLS PIPES: 1 /2” TO 24” WELDED PIPES: 2” TO 102” TUBES: 1/8” TO 4 ½” |
| SCHEDULE / WALL THICKNESS: | STD, XS, XXS, 5, 5S, 10, 10S, 20, 30, 40, 40S, 60, 80, 80S, 100, 120, 140, 160 NON-STANDARD THICKNESS FROM 2 – 50 MM |
| PROCESSES: | SEAMLESS / WELDED SEAMS- ERW/HFW/SAW/DSAW / HOT ROLLED/COLD ROLLED |
| STANDARD: | ASTM / ASME / API 5L / DIN / EN /JIS / GB / SUS ETC. |
| STEEL: | CS, LTCS, ALLOY, SS, DUPLEX STEEL, SUPER DUPLEX STEEL, NICKEL & NICKEL ALLOYS STEEL |
| LENGTH: | SRL AND DRL (5 METERS UP TO 13 METERS) AND CUSTOM LENGTH AS REQUIRED. |
| ENDS: | PLAIN / BEVELED / THREADED / GROOVED |
| ORIGINS: | AS REQUIRED BY PROJECT. |
| SEAMLESS, WELDED BUTT WELD FITTINGS | |
| SIZE: | SMLS FITTINGS: 1 /2” TO 24” WELDED FITTINGS: 2” TO 102” FABRICATED FITTINGS: 4” TO 80″ |
| SCHEDULE / WALL THICKNESS: | STD, XS, XXS, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160 NON-STANDARD THICKNESS FROM 2 – 50 MM |
| FITTINGS SPECIFICATIOS: | ASME B16.9, ASME B16.28, DIN28011, DIN2617, DIN2616, DIN2615, DIN2605, EN 10253-1, 10253-2 TYPE A & B MSS SP-43, |
| STANDARD: | ASTM / ASME / API 5L / DIN / EN /JIS / GB / SUS ETC. |
| STEEL: | CS, LTCS, ALLOY, SS, DUPLEX STEEL, SUPER DUPLEX STEEL, NICKEL & NICKEL ALLOYS STEEL |
| FITTINGS TYPE: | LR SR ELBOWS (45, 90, 180 DEG), INDUCTION BENDS, TEES, CROSS, CONCENTRIC REDUCERS; ECCENTRIC REDUCERS, CAPS |
| SURFACE FINISH: | HOT DIPPED GALVANIZING, EPOXY & FBE COATING, ELECTRO POLISH, SAND BLASTING, THREADING, SOLDERING AND PAINTING ACCORDING TO CUSTOMER REQUIREMENT ETC |
| ENDS: | PLAIN / BEVELED / THREADED / GROOVED |
| ORIGINS: | AS REQUIRED BY PROJECT. |
| FORGED FITTINGS OLETS | |
| SIZE: | FORGED FITTINGS: 1 /2” TO 4” BRANCH OLETS: 1/2” TO 80” |
| PRESSURE CLASS: | 2000#, 3000#, 6000#, 9000# |
| FITTINGS SPECIFICATIOS: | ASME B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95 |
| STANDARD: | ASTM / ASME / API 5L / DIN / EN /JIS / GB / SUS ETC. |
| STEEL: | CS, LTCS, ALLOY, SS, DUPLEX STEEL, SUPER DUPLEX STEEL, NICKEL & NICKEL ALLOYS STEEL |
| FITTINGS TYPE: | ELBOWS (45° & 90°) , TEES (EQUAL & REDUCING), COUPLINGS (FULL & HALF & REDUCING), UNIONS, CAPS, CROSSES, BUSHINGS & PLUGS(HEX HEAD, SQUARE HEAD, ROUND HEAD), ADAPTER, HEX NIPPLE, SWAGE NIPPLE, PIPE NIPPLE, BOSS, WELDOLET, SOCKOLET, THREDOLET, LATROLET, ELBOLET, NIPOLET, FLANGOLET |
| CONNECTION TYPE: | SOCKET WELD (SW), THREADED (NPT/BSPT/BSPP/UN/UNFISO 261/262), PLAIN, BEVELED ENDS. |
| SURFACE FINISH: | HOT DIPPED GALVANIZING, EPOXY & FBE COATING, ELECTRO POLISH, SAND BLASTING, AND PAINTING ACCORDING TO CUSTOMER REQUIREMENT ETC |
| ORIGINS: | AS REQUIRED BY PROJECT. |
| FORGED FLANGES | |
| SIZE: | 1/2” TO 80” |
| PRESSURE CLASS | ASME 150# 300# 600# 900# 1500# 2500# API 2000, 3000, 5000, 10000, 15000, 20000 PSI BS/EN PN6, 10, 16, 25, 40, 63, 100, 160, 250 JIS 5K, 10K, 16K, 20K, 30K, 40K, |
| FLANGES SPECIFICATIOS: | ASME B16.5, B16.47 & B16.48, API 6A & API 17D, EN 1092-1, JIS B2220, BS4504 |
| STANDARD: | ASTM / ASME / API 5L / DIN / EN /JIS / GB / SUS ETC. |
| STEEL: | CS, LTCS, ALLOY, SS, DUPLEX STEEL, SUPER DUPLEX STEEL, NICKEL & NICKEL ALLOYS STEEL |
| FLANGES TYPE: | WELD NECK FLANGE (WN), BLIND FLANGE (BL), SLIP-ON FLANGE (SO), THREADED FLANGE (TH), SOCKET WELD FLANGE (SW), LAP JOINT FLANGE (LJ), ORIFICE FLANGE, LONG WELD NECK FLANGE (LWN), SPECTACLE BLIND FLANGE, REDUCING FLANGE (RF), SWIVEL FLANGE, SPADE & SPACER FLANGE (PADDLE BLIND FLANGE), ANCHOR FLANGE, BLEED RING FLANGE, EXPANDER FLANGE, HUB & CLAMP CONNECTOR |
| FACE TYPE: | FLAT FACE (FF), RAISED FACE (RF), RING-TYPE JOINT (RTJ), MALE & FEMALE (M&F), TONGUE & GROOVE (T&G) |
| SURFACE FINISH: | HOT DIPPED GALVANIZING, EPOXY & FBE COATING, ELECTRO POLISH, SAND BLASTING, AND PAINTING ACCORDING TO CUSTOMER REQUIREMENT ETC |
| ORIGINS: | AS REQUIRED BY PROJECT. |
| INDUSTRIAL VALVES: | |
| SIZE: | 1/2″ TO 48” |
| PRESSURE CLASS: | 150-2500 3K PSI – 20K PSI |
| STANDARD: | API 6A, API 6D, API 6DSS, API 600, API 602, TAT, UL/FM, DIN, EN, JIS, ISO 17292, ASME 816.34, MSS SP 55 |
| STEEL: | DI, MS, CS, LTCS, ALLOY, SS, DUPLEX STEEL, SUPER DUPLEX STEEL, NICKEL & NICKEL ALLOYS STEEL |
| TYPE OF VALVES: | GATE VALVES, GLOBE VALVES, BELLOW SEAL VALVES, BUTTERFLY VALVES, STRAINER, PRESSURE SAFETY/ RELIEF VALVES, BALL FLOAT STEAM TRAP, PRESSURE REDUCING VALVE, MARINE VALVE, CHECK VALVE, KNIFE GATE VALVE SDNR GLOBE VALVES, ANGLE VALVE, STROM VALVES, AIR VENT HEAD, QUICK CLOSING VALVES, MUD BOX, |
| CONNECTION TYPE: | SCREWED, SOCKET WELD, BW AND FLANGED |
| ORIGINS: | AS REQUIRED BY PROJECT. |
| STUD BOLT AND FASTENERS: | |
| SIZE: | 1/4″ TO 4″ IN DIAMETER, UP TO 36″ IN LENGTH METRIC SIZES: M1.6 TO M64, UP TO 1000MM IN LENGTH |
| STANDARD: | STUD BOLT – ASME B16.5 & ASME B18.2.1 METRIC STUD BOLT – ISO/DIN STANDARDS FASTENER BOLT – ASME B18.2.1, ASTM, DIN, ISO 898-1 NUT – ASTM A194, ISO 4032 WASHER – ASME B18.21.1, DIN 125, ISO 7089 STANDARD MACHINE SCREW – ASME B18.6.3, ISO 7045, DIN 7985 SELF-TAPPING SCREWS – ASME B18.6.4, ISO 1478 |
| STEEL: | CS, LTCS, ALLOY, SS, DUPLEX STEEL, SUPER DUPLEX STEEL, NICKEL & NICKEL ALLOYS STEEL |
| TYPE OF BOLTS: | STUDBOLTS, HEXAGON BOLTS, SOCKET HEAD CAPSCREWS, NUTS, WASHERS |
| COATING TYPE: | XYLAN/PTFE; ZINC PLATED; HOT DIP GALVANIZED |
| ORIGINS: | AS REQUIRED BY PROJECT. |
| GASKETS | |
| SIZE: | 1/2″ TO 48″ THICKNESS: 0.5 MM TO 8 MM |
| PRESSURE CLASS: | BS10 : TABLES A, D, E EN1092-1: PN6, PN10, PN16, PN25, PN40 ASME/ANSI B16.5: CLASS 150 TO CLASS 2500 |
| MATERIAL STANDARDS: | ASBESTOS, NON-ASBESTOS, RUBBER-EPDM/NBR |
| TYPE OF GASKETS: | NON-METALLIC GASKETS, COMPRESSED FIBER (CAF), PTFE (TEFLON), RUBBER (EPDM, NBR, NEOPRENE, SILICONE), SEMI-METALLIC GASKETS, SPIRAL WOUND GASKETS (SWG), METAL JACKETED GASKETS, KAMMPROFILE, GASKETS, METALLIC GASKETS, RING TYPE JOINT (RTJ) GASKETS, CORRUGATED METAL GASKETS, SOFT CUT GASKETS (NON-ASBESTOS), FLEXIBLE GRAPHITE SHEET PRODUCTS, FLANGE INSULATION KITS, COMPRESSION PACKING & O-RINGS |
| ORIGINS: | AS REQUIRED BY PROJECT. |